Principle of operation
The device controls the security modes and sends an alarm signal to the Central Monitoring Station by pressing the key fob panic button.
Authentication prevents forgery of the device and false alarm signals.
Connecting and setting up
Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the detector. With one click, it can be connected to the hub in the mobile application.
Four-button key fob with command delivery indication
Number of buttons
False alarm prevention
Yes, long press or double press (firmware version 184.108.40.206 or higher. Manufacture date from March 19, 2020)
Deactivation of the panic button
Battery: CR2032 battery, 3 V
Up to 5 years
Jeweller radio technology
Communication range with central unit — up to 1,300 m in an open space
Two-way communication between devices
Operating frequencies — 866.0 – 866.6 MHz
Self-adjusting RF output power — up to 20 mW
Block encryption based on AES algorithm
Device polling period — 12 – 300 s
Operating temperature range
From -25°С to +50°С
Up to 95%
65 × 37 × 10 mm
Replacement and repair within 24 months of the date of sale. Batteries are not covered under warranty.
CR2032 battery (pre-installed)